To install the Box, you will need:
An active network port on your local network.
A Display which can be connected using a HDMI cable.
A power outlet.
These all need to be close to each other – at least for the initial setup.
...
Anchor | ||||
---|---|---|---|---|
|
Info | ||
---|---|---|
| ||
If you have a VWP-200 device please make sure you are using the supplied 5v AC power supply and not a VWP-100 12v power supply as this will short the device and void your warranty. |
Once the Box is plugged in, it will boot up. Make sure all of the other connections are in place first.
...
Human Interface Device (HID) compliant touch screens can also be used and can be connected via the USB connection.
When initially setting up the device, it is best if a HDMI-capable Display device is used to simplify any troubleshooting that is required.
...
The Vivi Box has two USB connections. They can be used for the following:
Connecting a USB audio device.
Connecting a HID compliant touch screen.
Performing a factory reset of the Box via a USB drive. Factory resets require the assistance of the Vivi Support team.
Anchor | ||||
---|---|---|---|---|
|
...
Anchor | ||||
---|---|---|---|---|
|
Double Flash like a heartbeat: Disconnected
Slow Flash: Offline
Solid: Online